How to Connect Speaker to Projector: Setup Your Home Cinema 2024

Are you trying how to connect speaker to projector. You’ll need to use external speakers if you want greater sound quality. 

It may get rather compulsive when you can’t hear clearly through your projector, especially when you are viewing something on your big screen. 

In actuality, many projectors come with poor audio quality.

Let’s finally look at all the options below if you’re attempting to figure out how to obtain sound from your projector.

Connect Your Projector with Stereo Speakers:

The simplest and most traditional method of sending sound from a projector to speakers requires you to insert a 3.5 mm jack into the socket simply.

One of the two 3.5 mm jacks on some speakers is for input, and the other is for output. You must insert the proper jack into the output socket to hear sound.

In addition, some projectors only have one connector, so you must determine if it is for input or output. Don’t get fooled about this because most projectors feature an audio output jack.

The Procedure for Connecting Stereo Speakers to a Projector

If you want to attach stereo speakers to your projector, you should do these steps: 

• If you dislike the speaker’s loud noise when connecting, turn the projector off properly.
• In most situations, you can find a 3.5 mm jack or auxiliary cable on the back of the projector where ports are situated. Use that to connect your speaker and projector.
• Test out the audio performance by starting a television program. Adjust the jack or auxiliary cord if necessary if it’s not functioning.

Connect Speakers to Your Projector with HDMI ARC

With HDMI ARC, speakers, and soundbars can be connected to projectors in a much better way than Bluetooth, stereo, optical audio, and other methods. HDMI ARC is my preferred method of connecting my projector.

The Procedure for Attaching Speakers to a Projector via HDMI ARC

The following steps must be followed if you want to use HDMI ARC to connect speakers to your projector:

• Verify the ports on both gadgets; your soundbar or speaker and projector should support HDMI ARC.
• Use an HDMI cable to connect the soundbar or speaker to one end and the projector to the other.
• Check to see if it is connected or not. Modern speakers and soundbars have a small LED that shows your connection status; alternatively, you can simply play a serial or movie to confirm.

Connect Your Projector to an A/V Receiver:

A/V receivers play the most important role in home theater systems due to their ability to link various audio and visual devices.

The Procedure Connect Your Projector to an A/V Receiver:

You must adhere to the method of the A/V receiver connected to your projector

• The receiver and projector should both be turned off.
• Find the receiver’s connections; you can connect your projector’s audio using several optical audio, 3.5mm jack, or HDMI ARC interfaces.
• You can use HDMI, Toslink, or auxiliary cables to connect the projector and receiver. The type of projector you have will determine what you need. HDMI ARC is always my preference
• You should turn on both devices.

How to Connect Bluetooth Speaker to Projector: (Simple 7 Steps)

Regarding Bluetooth connections, the procedure for joining a Mac computer with a Bluetooth speaker and a projector is quite typical. If you’re unfamiliar with this procedure, though, you’ve come to the correct spot. Whether your gadget can connect via Bluetooth or needs a wire is essential.

Many devices, such as a Bluetooth transmitter that plugs into the headphone jack, might function with specific projectors. Unfortunately, some goods might not be interchangeable because their effectiveness greatly depends on your projector. 

The Procedure for Attaching Speakers to a Projector via Bluetooth

You need to follow these procedures if you wish to use Bluetooth to connect speakers to your projector: 

1. Turn-on Your Projector

Turn on your projector and speakers by plugging them in. To finish the pairing procedure, both devices must be turned on because  Bluetooth is an electrical wireless connection. 

Pressing the power button on your speaker system should turn on all of the speakers at once. To view the device’s image, you should additionally set up a projector screen. For additional information, view our article on creating a projector screen.

2. Setting up Your Projector

Locate the “Settings” menu on your projector. When setting up your product for the first time, you could find that you have to set up the speakers at the same time as the product. 

If not, your menu ought to provide you with access to settings. To choose the settings you want, you must utilize the remote or projector’s buttons.

3. Select Bluetooth Option

Select the Bluetooth setting in the settings. You will need to enable Bluetooth if it isn’t already, and you can check whether it is by glancing at the switch icon that typically shows up on the video device from the video source. When Bluetooth is enabled, options to connect or pair a device should appear.

4. Go for Pairing Mode

Either choose “Pair” or “Pairing mode.” You can notify your device that you want to establish a Bluetooth connection with another device by choosing one of the options on the screen.

After that, a blinking light ought to appear. This light, typically blue, is situated close to the device’s BlueTooth emblem, which resembles two right arrows stacked on top of one another.

5. Apply step 4 to Your Speaker System as Well.

Because there are so many companies that produce speakers, the procedure of connecting them is more varied. It might be necessary for you to push or hold down a particular button. You can look up more details in your user manual or do a Google search for your device.

6. Click on Speaker System

Choose the speaker system from the pairing option on the projector. These gadgets occasionally have a number and a model name, or you might be able to figure it out by the process of elimination. 

A screen with speakers rarely appears. Thus, you most likely won’t be required to input a confirmation number. Nonetheless, the user’s manual most likely contains the information you’re looking for.

7. Make Sure the Speakers are Attached.

You can try using the projector system to play sound if you don’t hear a beep or any other indication that the systems are connected. If pairing is successful, the linked device should produce the sound rather than the projector. 

You might also experience improved audio quality, depending on your speakers. If this method doesn’t work, you could need a wired connection for the audio signal. 

In that case, you could watch movies on your DVD or Blu-Ray player by connecting your speakers directly to the player, bypassing the picture device.

Wireless Connections Without Bluetooth

You should constantly be willing to think outside the box. The most straightforward, least expensive solution to the audio problem is nearly always to use the projector’s existing audio connections. 

However, as was already mentioned, dealing with potential cable management issues could naturally put you off. You’re correct if you think there must be a more straightforward method because it is possible to wirelessly transmit your projector’s image to a pair of speakers. 

The only universally applicable fix for this is to remove the audio from the HDMI source projector using a specialized extractor like this one (from Amazon). 

There may be built-in Bluetooth in some projectors. Others may have sophisticated internals that enable direct streaming to Sonos speakers or that can be made wireless by employing an aftermarket accessory like this wireless RCA transmitter/receiver kit. 

Your best choice for “going wireless” is to avoid complex wireless options that require new equipment instead of forcing the system to be wireless by requiring fewer wires, such as by connecting the video source directly to the speakers. 

The built-in Speaker doesn’t Produce any Sound. Troubleshoot

Check the following if the case’s projector does not come via built-in speakers.

The most frequent cause is when the projector does not support Dolby audio but the playback device delivers Dolby Digital. Also, make sure the connection direction is right if you use a lengthy HDMI cable.

Long HDMI cables are sometimes active versions with predetermined output and input connection directions. There is a chance that the projector may fail initially if there is no sound, even after making sure everything is in place.

To troubleshoot, apply the techniques below:

1. Verify that the mute/unmute setting is configured properly.

2. The projector’s audio setting menu should be checked or modified.

3. On the side of the playback device, check or modify the audio output settings.

4. On the playback device side, try switching the audio output from “surround audio” to “stereo audio.”

5. Verify that all ports have the connections connected securely.

6. Test out the HDMI connection with the input and output switched.

7. As a last resort, try changing the cable.

Frequently Asked Questions

Conclusion

Connect Speaker to Projector: there are many ways to connect your projector to speakers for sound. Contemporary projectors have various connection options that support audio transmission. If projector lacks audio output, you can split the signal from your source, delivering the video to your projector and the audio to speakers in the form of active speakers, a powered amplifier, or an AV receiver. Simply choose the best technique for your device. Compatibility matters, finally.